Home / News / Civils / Railway Fencing: Requirements and 5 Types of Lineside Fencing
News
5 Types of Lineside Fencing on the Rail Infrastructure

Railway Fencing: Requirements and 5 Types of Lineside Fencing

Railway lineside fencing is the boundary fence between the railway and neighbouring land. In Britain the railway has a legal duty, dating back to the Railways Clauses Consolidation Act 1845, to fence its land to stop trespass and keep livestock off the line. The right type of fence depends on the risk from the land next to it, from palisade around depots to post and rail with mesh beside farmland.

Key facts

  • Legal duty: section 68 of the Railways Clauses Consolidation Act 1845 requires the railway to make and maintain fences separating railway land from adjoining land, protecting that land from trespass and stopping neighbours’ cattle from straying.
  • Scale: Network Rail manages around 28,000 km of lineside boundary.
  • Inspection: Network Rail checks its fences regularly, typically once a year.
  • Fit for the risk: the fence type depends on how the neighbouring land is used and the level of risk. Not every railway fence will keep small animals out.
  • Responsibility: Network Rail is responsible for the fence that forms the railway boundary, but not for other fences running parallel to it.

What are the requirements for railway fencing?

Who is responsible?

On the national network, Network Rail is responsible for the fencing that forms the railway boundary and will repair or replace it if there is a problem. Neighbours should not attach anything to railway fencing, including their own fences, because it may be damaged when the railway fence is repaired or replaced. Other railways, such as tramways and heritage lines, are responsible for their own boundaries.

What must the fence do?

The 1845 Act requires fences that separate railway land from adjoining land and protect it from trespass and straying livestock. In practice, a lineside boundary must:

  • mark the edge of railway land clearly;
  • deter trespass and vandalism, which put lives at risk and delay trains;
  • stop livestock getting onto the line where the neighbouring land is used for grazing.

Structures, buildings and occasionally natural screens of thorny shrubs can also act as railway boundaries.

How is the right fence chosen?

The type of fence depends on the use of the land next to it and the level of risk. A fence beside a housing estate or a known trespass hotspot needs to resist climbing; one beside a field of cattle or horses needs to be stock-proof. Network Rail asks neighbours to tell it before introducing livestock next to the railway, so it can check the fence is suitable.

Which standards apply?

Fences are commonly specified to the British Standard BS 1722, which has separate parts for different fence types, including chain link, anti-intruder chain link and welded mesh (at least 2.4 m high), steel palisade and open mesh steel panel fences. Work on Network Rail infrastructure must also meet Network Rail’s own requirements for the site.

How is fencing installed and maintained safely?

Work on the lineside boundary often needs protection from trains. Network Rail notes that where it is not safe to replace fencing while trains are running, repairs may be carried out at night or during planned track maintenance. Where a gap can’t be fixed permanently straight away, a temporary repair is made first.

5 common types of lineside fencing

1. Palisade fencing

Palisade fencing is made of vertical steel pales fixed to horizontal rails, giving a strong barrier that is difficult to climb. It is used where security matters most, such as around depots, signalling equipment buildings and trespass hotspots. Steel palisade fences are covered by BS 1722-12.

2. Welded mesh fencing

Welded mesh fencing uses rigid steel mesh panels fixed to steel posts. It gives good visibility, is hard to climb and cut, and is widely used along the lineside where trespass needs to be deterred. Anti-intruder versions are covered by BS 1722-10.

3. Chain link fencing

Chain link fencing is a woven mesh of steel wire fixed to posts. It is economical for long boundaries, often between the railway and roads, footpaths or open land. Tensioned wire fences need regular inspection, as they are more affected by the environment and damage than rigid panels.

4. Post and rail fencing

Post and rail fencing uses horizontal rails fixed to timber posts and is common along rural boundaries. On its own it is not stock-proof, so beside grazing land it is usually combined with wire mesh or strained wire.

5. Concrete fencing

Concrete fencing uses precast concrete posts or panels. It is solid and long-lasting with little maintenance, and panel systems also screen the railway from neighbouring property.

Boundary fencing vs worksite barriers

Lineside fencing is permanent and marks the railway boundary. It is different from the temporary barriers used on worksites to separate people from open lines, such as magnetic safety barriers, which attach magnetically to the rail web, need no tools and can be moved as work progresses.

Common problems with railway fencing

  • Livestock getting onto the line, especially where older fences were not designed to be stock-proof or the neighbouring land use has changed.
  • Trespass and vandalism, where fences are damaged or climbed.
  • Deterioration of steel and timber over time, particularly in exposed or hard-to-reach locations.
  • Temporary repairs left in place instead of permanent reinstatement.

Railway fencing at RSS Infrastructure

Our Civils and Construction team, led by Dave Bamford, installs and repairs lineside fencing for Network Rail and Tier 1 and Tier 2 contractors, and has delivered fencing on projects including the Midland Metro and HS2. Call 0330 113 0004 to discuss your fencing project.

Sources

Related projects: Iver, Taplow and Langley Stations.

Share this post

About Us

RSS Infrastructure (RSSI), based in Birmingham, Cwmbran, Doncaster and Tonbridge, provides infrastructure services for the rail, civil, and utilities sectors. We serve clients like Network Rail, WMCA, HS2 and Tier 1 & 2 contractors. Our services include Arboriculture, Civils and Construction, Geofencing, Industrial Rope Access (IRATA), Magnetic Track Safety, Rail Operations including Possession Management and P/Way, Rail Welding, Signalling, and Track Warning Services.

Recent Articles